A DIY Solar Water Heating Project Is Cheaper And Very Easy To Complete

A DIY Solar Water Heating Project Is Cheaper And Very Easy To Complete

It does not seem likely that future costs of electricity will be anything but very high; this should warn you that unless you look for alternative energy sources you might be saddled with skyrocketing electricity bills that will end up making a real dent in your wallet – and one that you can well do without. A DIY solar water heating system can provide you with the right kind of alternative solution to heating your water in the most cost-efficient manner.

Homemade Items

To build your DIY solar water heating system you can make use of solar panels that are also homemade and the other parts too can be homemade. Such a project is very easy to finish and it is ideally suited for a newbie that does not know much about building solar water heating systems.

Of course, when you get started with your DIY solar water heating system project make sure that you use a considerably larger sized water tank than your existing thirty to fifty-gallon electric models. The good news is that the larger-sized storage tanks will be run at a hugely reduced cost and the lifespan is twice as long as compared to the conventional tanks.

You also only need average handyman skills to succeed with your DIY solar water heating project and in fact, if you know how to use a saw and are familiar with using the ruler you can then expect to achieve success in your efforts to have your homemade solar water heating system. You should also be good at following instructions and the best part about engaging in a DIY solar water heating project is that you can buy the entire knocked-down system for as little as thirty dollars.

With such a low investment you can easily get started and gain experience in using solar power and once you have completed a DIY solar water heating project you can then go ahead and try a larger project. In addition, the DIY solar water heating project will also prove to be very educational and of course, you will feel a justified sense of pride in showing off your handiwork to your neighbors and family and also your friends.

For home solar water heating equipment, you must first decide whether you want to use passive systems or active systems. In addition, you have to learn about other items of equipment including solar collectors which can be flat plates or evacuated tubes; and, there are also heat pumps that can be used to heat water with solar energy. Also, it is necessary that you also consider the footprint left by different items of equipment regarding preserving the environment.

Use Diy Passive solar Heating and Conserve Power

The passive solar heater is one that radiates heat by trapping the energy of the sun.  Hanging a black metal panel in the window under direct sunlight is one of the best ways of having a simple passive solar heater installed at home, which in turn can efficiently radiate solar energy to heat the interiors of your home.

Diy Passive Solar Heating Plan

Do It Yourself (Diy) passive solar heaters are eco-friendly and you can make it within $10.  You can save money and natural resources by utilizing the sun’s energy.  Make a device with the help of foam board, black spray paint, and plexiglass.  The apparatus for DIY passive solar heating has to be placed near the window and it is capable of increasing the temperature by nearly 10 degrees.  Depending on the heat received by the apparatus, the room temperature automatically increases.  It is possible to harness the sun’s rays in various ways.  Above all, DIY passive solar heating is noteworthy not only concerning its efficiency but also because the heater is self-made.

The usefulness of Diy Passive Solar Heating

A DIY passive solar heater is the best initiative to reduce power consumption at home.  This smart way of using the rays of the sun lowers the electricity bill by nearly 30%.  To introduce this device, the house has to be designed accordingly.  The location and structure of the house are very important to set up this device.  Modification is possible in the case of traditional constructions.

Maximizing the Power of Diy Passive Solar Heating

In winter solstice, if your house is located in the northern hemisphere, it is possible to trap the sun’s energy even during the shortest day of the year by installing the device in the south.  By doing this, the optimal orientation is exactly perpendicular to the rays of the sun.

Further to this, survey the whole house and find out the room which gets the maximum amount of sunlight.  The angles of the windows have to be altered in such a way that they can trap the highest amount of solar energy. Installing a DIY passive solar heater at that window will have it more efficient and powerful.

Tips for Effective Solar Energy Capture

The technology involved in DIY passive solar heating is very simple and entails the nighttime radiation of the heat received by the device during day time.  In cold countries, smart planning by incorporating passive solar heating design tactics while constructing the house can help in energy savings.  Wall absorbs heat during the day and releases it after sunset.  The bedrooms located on the southern side can absorb more abundant heat than the other rooms.  The bedroom next to the target room that gets heated also provides warmth during the night.  Digging a basement is a great idea if you intend to have a cool room in the summer and a warm room in winter.  Energy-efficient windows and insulated roofs are important things to be incorporated as a part of passive solar heating plans.

Leave a Reply

Your email address will not be published. Required fields are marked *